Jersey Modeler

Home | KEROSENE | GAS | GLOW | SMOKE | ACCESSORIES | PHOTO's & LINK's | FOREIGN DEALERS

ACCESSORIES

JM-SIMPLE FUEL DOTS (JM-SFD)  = 4 CHOICES!
SFD.jpg

SFD - 4x Choices

SFD2.jpg

The SIMPLE FUEL DOT "SFD" = $14.95 comes with a Aluminum Bezel Port & "Twist-Lock" Cap!  Twist ccw to unlock Cap ~ pull out ~ pull tubing off Cap stem ~ insert your Probe ~  fill tank ~ push tubing back onto stem ~ insert Cap ~ twist cw to lock!
In addition: the SFD+R = $24.95 has a Return Port to mount & connect this to the vent from tank! It comes with "Twist-Lock" T-Handle Plug& RBF Streamer.  Use during storage or transport. It also has a separate Twist-Lock fitting & 2' Line to help direct the over-flow during tank filling so fuel can go back into your container ~ not on ground.

SFDC.jpg
SFDB.jpg

SFDR.jpg

***************************************************NEXT**************************************************************

New "JMFV" Dry-break Fill & Return Ports!
For fueling the tanks in your Plane, Helo or Jet use the
"Dry-Break" Ports & Return Line for a Sealed System!
~Replace your Fuel Dots today!~
Just choose Cap, now 3x Colors!
JMFVL6.jpg

JMFV or JMFP + Cap Color

JMFP is all that is needed for your "Second" Plane!
 On Sale! $29.95>$24.95
JMFPL2.jpg

G44.jpg

IMG_4787.jpg
Ready to Fill & Return Over Flow
JD9.jpg
Both Mounted on side!
   

This is the Special JMFV "Dry-Break  Probe" that is NOT Included
with Ports for second plane.

 

Probe.jpg

 

chargers.jpg
$24.95

This ”Smart Pulse Peak Charger” is designed for charging any NiMH Battery Pack from 2.4<12vdc & <10 cells. The “Pulsed Peak” charge output = 400ma.& Trickle = 50ma.

We include above SPPC with ALL Electric units ordered ~ but now available separately!

 Ready for World Wide use 110<220vac 50<60hz 
( Adapter may be needed)

DPDT Switch w/ Rubber Boot = $9.95

switch.jpg

switchboth.jpg

 
 
 

pic_main_PQ-12.jpg

OUR BEST PUMP!
JM PUMP: Weighing only 10 ounces.  The JM PUMP comes with a 12 volt DC motor, is reversible  &  can be run as low as 7.2V's! The DC motor with heat radiating fins drives the chemical resistant liquid pump. The materials that come into contact with the liquid being pumped are: molded Delrin pump body, Stainless steel shafting, a Teflon diaphragm and a rubber elastomer seal. With 3/16" ID hose fittings, the output flows are listed below. Pump can be used for Gas, Kerosene or Smoke Fluid = NOT GLOW

$69.50

DPDT Switch for JM Pump
567761.jpg

Need a switch? DPDT for JM Pump

chart.jpg

***************************************************NEXT**************************************************************

Filters.jpg

Choices

***************************************************NEXT**************************************************************

x2s.jpg
$4.00

***************************************************NEXT**************************************************************

Viton.jpg

Looking for the BEST Tubing for inside your
Gas or Smoke tank or maybe to Muffler?
Here it is ~ VITON: Per Foot~ $4.75.

Made of 100% pure Viton®, a high performance synthetic rubber. Excellent temperature resistance: -40°F to 400°F continuously; 600°F periodically. Offers the widest range of fluid and chemical resistance of any commercial rubber. Excellent resistance to Gas, Smoke Fluids & Kerosene. Stays flexible!

click here to play video

*

25tubeweb.jpg
1/4" x 1/8" GAS PVC Gas Tubing

 

JM DEALER's
Contact Info
P# 732-240-0138  
Jersey Modeler
2012 Champlain Street  
P.L.P. Manchester
Toms River, NJ. 08757-1123